Thanks for that, another case of not seeing the forest for the trees... > On 21 Apr 2020, at 2:21 am, John <[email protected]> wrote: > > A fixed width of 1000 may be your issue. > > JT > > On 4/18/20 7:43 PM, Phill Carter wrote: >> A forum user posted some PDF doc errors in the way some graphics appear: >> >> <https://forum.linuxcnc.org/32-documents/38867-documents-2-8#164491 >> <https://forum.linuxcnc.org/32-documents/38867-documents-2-8#164491>> >> >> They do appear ok in the HTML docs: >> >> <http://linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html#ohmic-sensing >> >> <http://linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html#ohmic-sensing>> >> >> <http://linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html#_hypersensing_with_a_mesa_thcad_5 >> >> <http://linuxcnc.org/docs/2.8/html/plasma/plasma-cnc-primer.html#_hypersensing_with_a_mesa_thcad_5>> >> >> <http://linuxcnc.org/docs/2.8/html/plasma/plasmac-user-guide.html#run-panel >> <http://linuxcnc.org/docs/2.8/html/plasma/plasmac-user-guide.html#run-panel>> >> >> <http://linuxcnc.org/docs/2.8/html/gui/gladevcp.html#gladevcp:hal-pin-changed-signal >> >> <http://linuxcnc.org/docs/2.8/html/gui/gladevcp.html#gladevcp:hal-pin-changed-signal>> >> >> How do I go about fixing this? >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers >> > > > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
