Following up on some off-list discussion with Eric Schulte some time ago, I've just pushed a change to officially enable test selection. The base functionality had been there for a while… Here's the pertinent documentation, also added to the build system documentation on Worg:
http://orgmode.org/worg/dev/org-build-system.html#sec-5 --8<---------------cut here---------------start------------->8--- Sometimes you only want to run a set of specific tests instead of all. This is especially useful if you are trying to bisect a large range of commits with a run script. Instead of checking if the failing test was perhaps a different one than the one you wanted to check for, running just these test (or tests) makes that task much easier. For instance, make BTEST_RE='^test-org/forward-element$' test-dirty would run only the test for forward-element and nothing else, which is also much faster than running the almost 500 other tests as well. Keep in mind that the test selector is a regular expression, the default value of "\(org\|ob\)" matches all tests. --8<---------------cut here---------------end--------------->8--- If you've copied all of default.mk to local.mk or were adventurous enough to use your own definition of BTEST you will have to merge the changes to default.mk into your configuration to use test selection. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Wavetables for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldUserWavetables
