The paddle is the most logical device to use to stop the CW from the radio's memories.
In a contest, you should probably be using the CW sending capability of your logging program instead of the radio's memories as it most likely allows hitting of the Esc key on your keyboard to stop the CW which I'm sure you'd find more convenient. 73, Bob W5OV -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andy Wood Sent: Thursday, July 22, 2010 9:57 PM To: [email protected] Subject: [Elecraft] K3 Feature Request - Stopping CW Memory Playback with PTT I have recently entered into the world of CW and participated in my first contest using both SSB and CW modes. I noticed that you cannot stop the CW memory playback by activating the PTT (either from a microphone attached to the front panel or a footswitch plugged in the rear). It could only be stopped by touching the paddle. Could this be implemented in a future firmware version? There is also the possibility that there may be a very good reason not to. Andy VK4KY -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Feature-Request-Stopping-CW-Memory-P layback-with-PTT-tp5328156p5328156.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
