Ok figured I'd ask here and see if someone had some input on the differences here. Hopefully someone has done more design with these than I...
My application is that I'm looking for connectors to install on some high end home made band-pass filters. 83-1R; http://www.mouser.com/ProductDetail/Amphenol-RF/83-1R-SO-239/?qs=sGAEpiMZZMtqi3rrGzC6kucWGwVoNS6TyriIimuNw9A%3d 83-1R-RFX: http://www.mouser.com/ProductDetail/Amphenol-RF/83-1R-RFX/?qs=sGAEpiMZZMtqi3rrGzC6kqBNVAfbUIcAaUNmqqZ3zpA%3d 83-798: http://www.mouser.com/ProductDetail/Amphenol-RF/83-798/?qs=sGAEpiMZZMtqi3rrGzC6kptFUq3vT%252bWoMcHyGEmWyaU%3d The 83-1R is a number I've seen a lot in usage and its the connector I'm leaning toward. It is also the cheapest of the 3. I know they are all going to be good connectors but is there any benefit to going with the other two versions? I believe that the RFX version is a commercial version of the same thing (at only 20 cents more) but I don't know what the difference is. Finally the 83-798 claims to be an SO-239A connector... I tried doing a search for SO-239 vs SO-239A and in a quick gander didn't turn up much... Any input would be appreciated. Thanks ~Brett (N7MG) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
