Increasing the RF gain does deflect the meter upwards. I should have mentioned that there is an S3 noise floor. Here's the steps that I followed:
Tune a signal that's peaking S7 with RF gain fully CW Tune away from any signal (S3 noise) adjust the RF gain CCW until the meter reads S5 Tune that same signal that was peaking S7 but now he's peaking S9 +10db. If I then increase the RF gain the signal returns to peaking at S7. I can reproduce this behavior with signals at any level On Jul 14, 2010, at 10:34 PM, Garry Shapiro wrote: > In every radio I have had, reducing the RF gain deflects the Smeter upwards, > not downwards. > > On 7/14/2010 7:56 PM, Robert Mitilieri - N9EF wrote: >> >> While I've seen many post regarding S meter calibration I have a question to >> which I haven't found an answer in the archives. >> >> Let's say I'm listening to a signal that's peaking at S7. I usually decrease >> the RF gain so that, with no signal, the S meter reads about S5. This >> reduces the background noise. However when I do this on my K3, the signal >> that was peaking at S7 is now peaking at S9 +10db. Reducing the RF gain >> further shows the signal peaking near S9 +20db. I am accustomed to having >> the signal still peak at S7 since the signal strength hasn't actually >> increased at all. >> >> I'm still getting used to the K3 (s/n 4411). Is there a configuration >> parameter that I may have set incorrectly? >> >> Robert - N9EF >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
