Chuck, Have you made sure that your synthesizer has been configured properly? The instructions for this can be found on page 49 in the owners manual.
Synthesizer This procedure is normally done at assembly time or by the factory. • Hold CONFIG and find the CONFIG:VCO MD menu entry. Set the parameter fully clockwise to CAL. Exit the menu. The synthesizer will be tested and calibrated. • To calibrate the 2nd synthesizer (for the sub receiver), locate CONFIG:VCO MD and set the parameter to CAL, tap SUB to turn on the SUB icon, then exit the menu. Possibly this may help. Good luck, Mike N8XPQ -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Help-Needed-in-Chicago-Area-tp5149914p5153730.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
