LS, Just as a guess at the problem - How are you powering down the K3. If you are tuning the power supply off before the K3, then 'strange happenings' may result. To assure a smooth shutdown with everything remembered, turn the K3 off using the front panel power button or the PS0; command and allow it to cycle down before removing the power.
73, Don W3FPR lstavenhagen wrote: > Hi all, > > I just noticed the KAT3 in my K3 seems to forget its settings over time. I > havn't narrowed down the exact conditions under which this occurs yet, tho. > But I'll, say, do a series of tunes on 40M. It'll remember those while I'm > using the rig. After a brief shutdown, they'll be retained and I still have > the low SWR settings on 40 M. > > But it seems like if I either play around with it a bunch or leave the rig > off for a while and come back to it (say overnight), the recalled settings > are eventually all wrong. I.e. all the recalled settings give high SWR's and > I have to retune everywhere on all the bands. > > AGain I'm not sure how to reproduce this because it works generally most of > the time, particularly during a constantly-on use of the rig so I'm still > trying to pin this down. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
