Bonding the chassis of each transceiver to DXDoubler is recommended by TopTen Systems but their application note also says that bonding alone may not always be enough.
I've always recommended bonding every piece of equipment (including the computer) to a single common reference (ground) point, generally the same point at which all feedlines enter the shack. 73, ... Joe, W4TV > -----Original Message----- > From: Joe Planisky [mailto:[email protected]] > Sent: Monday, March 15, 2010 8:47 PM > To: Joe Subich, W4TV > Cc: [email protected]; [email protected] > Subject: Re: [Elecraft] DX Doubler/K3 issue > > > Would bonding the two chassis together with thick wire or braid work? > > 73 > -- > Joe KB8AP > > On Mar 15, 2010, at 4:44 PM, Joe Subich, W4TV wrote: > > > > > This is a common problem with DXDoubler due to differences > > in chassis potential between transceivers. ... > > > 73, > > > > ... Joe, W4TV > > > > > > > > > >> -----Original Message----- > >> From: [email protected] > >> [mailto:[email protected]] On Behalf Of > >> [email protected] > >> Sent: Monday, March 15, 2010 4:41 PM > >> To: [email protected] > >> Subject: [Elecraft] DX Doubler/K3 issue > >> > >> > >> ... > > >> When I > >> plug the headset into the DXD phone socket, I hear a hummy > sidetone > >> and low-level hum on both radios.... > > >> Rob K6RB > >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
