K0AWU wrote: > ... CW > reverse is close but I still have to retune when I change from > USB to CW. I didn't want to be forced to retune the frequency.
There is a configuration option that eliminates the need to retune. From the notes for firmware version 3.19: "AUTOMATIC CW VFO OFFSET ON MODE CHANGE: Allows switching quickly between SSB and CW mode without either you or the other station having to re-tune the VFO (often done on 6 meters and transverter bands). First, locate CONFIG:CW WGHT and tap '5' on the keypad until you see "VFO OFS". From then on, when switching to CW mode from any other mode, the VFO will be offset by an amount equal to your sidetone pitch (as set using the PITCH switch in CW mode). If the sideband most recently used on this band is USB, the VFO will be shifted UP; if it was LSB, the VFO will be shifted DOWN. Note: If you make frequent use of this feature, you may want to use CW reverse on bands where you use USB, and CW normal on bands where you use LSB. This results in perfect pitch matching when listening to a CW signal and switching from SSB to CW." 73, Rich VE3KI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
