I could send only one command for the text to send, but then there is no way to interrupt the the transmission. It seems the ˆD don't clear the buffer and stops sending immediately. In this way the KY command is useless for me in RTTY. My idea was to add direct FSK output in my Dx-ped logger.
73 de Tom, DL2RUM Julian, G4ILO wrote: > > > > Tom, DL2RUM wrote: >> >> I'm not quite sure if the following a bug under 3.30: >> Mode is set to Data FSK D >> When sending text to the TRX using the KY command, the text will be sent >> out and after that the signal is idling (didles) a while before the K3 >> switchs to RX. That's okay. >> But when sending the next KY command during this idling time, the >> transmission changes to an unmodulated carrier, without didles. It takes >> few seconds before the next text will be send out. >> > Interesting. I can reproduce this using KComm by selecting the K3 DSP > modems option, clicking Start sending and typing slowly. PSK D appears to > have the same problem. The transmission doesn't change to a single tone, > but there is a delay of a couple of seconds before the next character is > sent. This is with the last beta version sent to registered beta testers. > -- View this message in context: http://n2.nabble.com/K3-KY-command-and-RTTY-tp3730340p3736696.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
