> Stereo cable connected to LIN OUT which is set to NOR. SUB RX off. > Audio is only in the Main/Left channel. Turn SUB on and then audio is > present on the right channel. > Correct. > Set LIN OUT to =PHONES and audio is present at LIN OUT on both > channels and the right channel switches when the SUB RX is toggled. In > this case, the FP AF control must be used to adjust gain. > Yes, it echoes what you would hear using the headphone jack. > Question: I have not found the answer in the manual - yet. Is there a > way to have LIN OUT set to NORM and have audio in both channels even > if the SUB RX is off but have the SUB RX audio in the right channel as > with the =PHONES setting? > Not with the present UI.
73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
