Tony, Did you mean "NR" when you stated "NB"? I find no audio reduction when turning on the NB unless I have the IF NB cranked up to maximum.
I first thought the new NR was reducing the audio, but I found it was not so when one is tuned to a signal. The noise reduction is so effective that in my case it almost behaves like a squelch because there is not band noise at all (my noise level is not usually very high anyway) - so there is a natural tendency to turn up the audio gain because there is no noise to hear - but when a signal is present, the audio is then LOUD. As I have stated in prior posts, I *do* find a bit of AF reduction on SSB if I have the NR set to F3-x or F4-x, but I find NR on SSB quite effective at the F1-x or F2-x settings. 73, Don W3FPR N2TK wrote: > Also it would be nice if the audio didn't reduce in volume when turning on > the NB. > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
