I see similar strange things when tuning VFO A around 4.800. When VFO A is below 4.800 B is at 4799.96 - when A goes above 4.800 B goes to 5.285 MHz. This is on SN 1114 - 3.25
Glad I don't normally listen there. Paul W2LE Robert Beard wrote: > Good Morning List, > > Just noticed, while tuning VFO A down through 4.800.0 MHz, I can hear a relay > switching. > I believe this is band pass filter switching on the KBPF3 board. > > All well and good, except that VFO B jumps to 3.526.76 MHz at the switching > point, regardless of any previous setting. > > When tuning VFO A back up through 4.8 MHz., the relay switches and VFO B > jumps to 5.300.00 MHz. > > Anyone else seeing this curious behavior? (Or am I missing something....?) > > K3 is s/n 1500 with 3.14/2.16/2.16 installed. > > Best regards, > > Rob, N6VX > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
