Perhaps, but I don't think that's likely. The K3 Utility causes an MCU reset (a "reboot") after loading each firmware file. That's what's happening when the display goes dark for a second or two after loading each firmware file.
Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of K9ZTV Sent: Monday, August 17, 2009 10:37 AM To: Elecraft Subject: Re: [Elecraft] K3 Autonotch Gremlin I suspect the reason some are experiencing "not working" one day and "working" the next day is that they are overlooking the requirement to reboot the K3 following each firmware upgrade (just like a computer, which it is). 73, Kent K9ZTV Someone wrote: > When I downloaded v.3.25 the autonotch did not seem to work on any band. The next day I tried the autonotch and it worked well on a 40 meter broadcast heterodyne > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
