After lengthy QSOs and after slight retuning, power from K3 drops to about 1-2W and the radio draws about 3A. It is still set to 110W and cranking the power down and back does not change anything. Same after QSY to another band. PA temp shows 35C. A few minutes later the power is back. This problem is new and may be peculiar to 3.19.
There is an old problem still present on 3.19. AFter turning the rig on, in SSB the peak power starts at 30-70W and in a minute of transmitting rises to about 95W (when set to 110W). Measurements with LP-100 calibrated in factory. The initial power varies from time to time. Any ideas? Ignacy -- View this message in context: http://n2.nabble.com/Power-variations-in-K3---3.19-tp3231601p3231601.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
