Tom, That is taken care of automatically. If both the KAT2 and the KPA100 are detected, the KAT2 is set to ANT1 and cannot be changed until the KPA100 is removed. Of course, if both the KPA100 and KAT100 are connected to a K2 having the KAT2 also, the ANT1/2 switch works, but it refers to the antenna jacks on the KAT100 - the KAT2 will still be set to ANT1.
What all this means is that you connect the RF Path from the K2 to the KPA100 at the ANT1 jack. 73, Don W3FPR [email protected] wrote: > I have been using my K2 exclusively in the 100W configuration. I now want > to have the option of taking just the base radio and using it stand-alone > for QRP, but without compromising my normal use with the KPA100. I have > separated the KPA100 in the case with the antenna tuner. > > I am consideinr adding the KAT2 tuner to the base radio. I see that you use > the ANT 1/2 switch with the KAT2 for antenna selection on the QRP radio. > Can I stil use this switch to select between my 2 antennas on the 100 Watt > tuner (when I am bypassing the KAT2)? > > Thanks, > > Tom, KG3V > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
