Tom, please verify that CONFIG:KPA3 is "PA NOR". Dick, K6KR
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tom (HB9DOD) Sent: Thursday, May 14, 2009 7:59 AM To: [email protected] Subject: [Elecraft] K3 Hardly any Output Hello Turned my K3 on this afternoon only to find out it has only about 10 Watts output on full 120 scale.. reset, restored, nothing changed.. Did the whole alignment to find out that on all bands with the 5 watt tx alignment i can get any higher as 2.7 till 2.8 is goes up a very short time and comes back to 2.7 Tx Alignmnet with the Utility gave err txg error.. K3 was functioning 100% couple of weeks ago.... Also with the 3.11 fw Any help?? PS this is the second K3 i have in hand with the same problem Both i could not solve sofar... 73 Tom mailto:[email protected] -- 73's Tom mailto:[email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
