Tom, If you want smaller than the K3, the EC1 and EC2 enclosures sound like what you may be looking for. Of course, they are K2 gray color, but a bit of spray paint can change them to K3 black (but with a wrinkle texture).
Of course, there is alway the TenTec enclosures if the EC1 and EC2 do not fit the bill - and several other enclosures are available from the catalog pages of Mouser and DigiKey. 73, Don W3FPR Radio Amateur N5GE wrote: > On Fri, 1 May 2009 11:20:30 -0700, wayne burdick <[email protected]> > wrote: > > [snip] > > >> We also sell blank project enclosures styled to match the K2 (EC2) and >> K1 (EC1). There are two different height tilt stands for the EC2: ETS15 >> (1.5") and ETS2 (2.5"). You'll find these on our order page. >> >> 73, >> Wayne >> N6KR >> > [snip] > > I'd like to see some small enclosures for things like the home brew > "in shack" end of things like coaxial switching units, Mic switching > assemblies, etc. (4x3x2", 4x6x3", etc.) > > Now that I have two k3 XCVR's I'd like to construct some Mic switching > assemblies, etc. > > For my VHF UHF activities I'd like to have a small enclosure for > switching coaxial relays up on the tower. > > Tom, N5GE > K3 #806, K3 #1055 > XV144, XV432 > W1 and other small kits. > http://www.n5ge.com > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
