Hi James, The Kenwood knob needed to be machined slightly to fit the nut holding the encoder in the front panel and the hole was drilled slightly larger to accommodate the K3 encoder shaft.
Todd, WA7U ----- Original Message ----- From: "James Sarte" <[email protected]> To: "'T Gahagan'" <[email protected]>; "'Elecraft List'" <[email protected]> Sent: Sunday, March 08, 2009 4:59 PM Subject: RE: [Elecraft] Photos of K3 with various knobs for A and B VFO's > That Kenwood weighted knob from WA7U looks like an almost perfect fit. > Was > the shaft OD on the Kenwood's VFO similar to the K3? > > 73, > James KC2UEE > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of T Gahagan > Sent: Sunday, March 08, 2009 6:19 PM > To: Elecraft List > Subject: [Elecraft] Photos of K3 with various knobs for A and B VFO's > > Several of you wanted a photo of the K2 knob being used as the K3 B-VFO > knob. Here's the link and thanks to Don, WB8YQJ for posting the photos. > > Todd, WA7U > > > http://www.zerobeat.net/mediawiki/index.php/SpotLight_on_K3 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
