Looks very useful, but what about a version for the Mac OS? If a version of K3-EZ for the Mac OS is not in the cards, is there anything out there that is similarly robust with the K3?
Robert On 2/6/09 12:00 PM, "[email protected]" <[email protected]> wrote: > > While exploring the Elecraft site, I discovered K3-EZ Software by Bill > Coleman.? See it at: > > http://home.roadrunner.com/~n2bc/SW.htm > > Now, I have no vested interest in the program, but I found it to be quite > useful and highly recommend it.? I spend some time adjusting the RX equalizer > and found that it is quite effective to my hearing loss.? It is quite amazing > how you can bring up the highs and cut out the lows.? I have yet to deal with > the TX equalizer.? The program seems to give me all the information about the > K3 I need and allows me to make changes without digging through the menus.? > Also, it will allow you to load the memories.? Other programs are good too, > but it seems that Bill's program goes into the depth of the rig more than > others. > > One thing I would recommend to the user is to use a high baud rate than 4800.? > The program goes out and changes settings and at 4800 baud it can be quite > slow. > > Let me also say, I have about three or four programs on my computer which > talks with the K3 and they are all good...Bill's seems to go (as I said) into > the "soul" of the K3 > > Lee - K0WA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
