--- the forwarded message follows ---
--- Begin Message ---
On Thu, 8 Jan 2009 17:17:58 -0800
"Dick Dievendorff" <[email protected]> wrote:
K3 Utility Version 1.2.1.6 for Windows, Mac OS/X and Linux, is now available
on the Elecraft web site at http://www.elecraft.com/K3/k3_software.htm
This version supports the new "Power On Banner" feature offered in MCU
version 2.77 and later.
The new MCU 2.78 Beta Release that supports this feature is available on the
same web page.
The K3 Utility's Configuration Tab has a new "Edit Power On Banner" button
that opens a dialog where you may enter a short (22 character) message that
is displayed as a "marquee banner" during the K3 power on sequence. The
banner is displayed with MCU 2.77 and later.
This K3 Utility Version also fixes a bug in the Transmitter Gain Calibration
process. In the prior K3 Utility version Tx Gain Calibration failed if
CONFIG:TECH MD was OFF.
I'd again like to thank Brian Broggie, W6FVI, for sharing the Elecraft lab
tool for Tx Gain Calibration that was the basis for the K3 Utility Tx Gain
calibration feature.
David Fleming, W4SMT, is the author of the Mac and Linux versions of the K3
Utility and also deserves our thanks for a lot of hard work.
73 de Dick, K6KR
**********************************************************************************************
Dear Dick,
Since the LATEST software VERSION UPDATE is "BETA" then should'nt all of us WAIT until all the
KINKS ARE WORKED OUT OF THAT VERSION before using that NEW DOWNLOAD???
In our mind "BETA" still means in the "experimental-stage!!!"
Whaddah ya think???
Regards,
Jim/nn6ee
s/n2406
--- End Message ---
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
