Folks,
I do have to agree with Ron. Given what you have invested in a K3 kit,
it seems quite foolish to me to risk that investment by 'going cheap' on
an antistatic mat and wrist strap. You can find the proper antistatic
measures for less than $30, and that is less than 3% of your K3 investment.
Certainly, you can use aluminum foil (short hazard), the packing bags
(not a good solution) and conductive metal wrist bands (personnel
hazard), but the consequences of failure for those methods can be more
costly than the price of your K3.
So take your pick, you can go 'cheap' at great risk to your personal
safety and to your K3 investment, or you can do it right and purchase
the correct anti-static materials. The correct stuff will last you a
long time.
Yes, I have previously used antistatic measures such as a damp newspaper
in my younger days, but I always wondered about just how much dampness
was correct. So, some time ago, I purchased an antistatic mat designed
for computer keyboard use, and have found it adequate for my work.
For those who do not have Google search engines, I found economical
solutions at
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1472803&CatId=1802
and
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1216697&CatId=1802.
Google and other search engines may show you more sources.
73,
Don W3FPR
Ron D'Eau Claire wrote:
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of *Missouri Guy
*Sent:* Friday, December 12, 2008 4:48 PM
*To:* [email protected]
*Subject:* Re: [Elecraft] easy source of static dissipating work mat?
I haven't done this, but here's some info:
I *think* there was a "Hints and Kinks" article in QST
quite awhile ago where a guy made a "mat" using
some Masonite (tempered hardboard, etc) and a
quantity of India Ink. He said (as I recall) that the
India Ink has a lot of carbon in it. When applied to
the hardboard, it drains off any static (provided it's
grounded of course)….
Just to throw more meat into the ring.....
While building the K3, the instructions never tell
you to power up any "bare" circuit boards that are just laying on
any mat or bench. For temporary use what would be
wrong with, say taking some aluminum foil, and gluing
it to "whatever" and grounding the aluminum
via a megohm resistor?
73,
Charlie, N0TT
Genuine O.T.s (I have to admit I’ve done this) used to make high-value
resistors by drawing a line with india ink on a piece of paper. An
inch or so of such ink, perhaps 1/8” wide, produced a resistor
typically between 10 and 50 megohms – a perfect “grid leak” resistor
for a vacuum tube regenerative detector.
In my defense, I’ll say that I did **not** do this back in the heyday
of the regenerative detector as the state of the art. I happen to be
interested in vintage circuits and gear ;-)
But why bother, with the extremely low cost of either mats or wrist
straps – especially compared to what you’ve got in a K3?
Ron AC7AC
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
