Bill,
If you are using a USB to serial adapter, try setting the speed as high
as you can - it is counterintuitive, but many adapters have problems at
low speeds but work fine at higher speeds. Again make sure everything
is set for the same speed.
If you possibly can, try using a real serial port, at least as a trial.
73,
Don W3FPR
Bill Parry wrote:
Thanks to all that responded.
+The manual said specifically not check DTR and RTS, so I did not. I tried
to check them and it made no difference.
+The radio, the comport (6) and DXBase are all set to 4800 baud.
I have not tried to use the 38,400 baud setting, but I have had more than
one person say that the 4800 does work. If I was more knowledgeable, I could
be a little more specific. (Maybe I should call the Geek Squad :-)
Brendan, I believe that you sent the update for radio.ini but I didn't want
to add another variable to a situation that I am at a loss how to fix.
Bill
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
