Joe Subich, W4TV wrote:
I agree with Bob. The "tap dance" for split is very prone to
error. I can't think of any other transceiver that requires
two presses of the A->B button to store both mode and frequency.
The K3 previously did copy mode (and other parameters) on the first tap.
But some users felt that they would like to be able to choose whether to
do this. The change added overall flexibility at the cost of an extra
tap. Sure, it's a compromise, like all engineering and software design.
Someday perhaps we'll be able to define macros within the K3 (of course
today it can be done in a rig control program). If I could define a
macro for split, here is what I would do (in CW mode):
Split on
Subrx on
Copy freq and mode to subrx
Set subrx bandwidth to 1 kHz (leave main as is)
Move subrx up 2 kHz
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
