Phil,
You have most likely changed the sidetone source in the menu.
Go into the menu for ST L (or tap the PF button if you have one set for
that function).
Then EDIT the parameter
Tap DISPLAY to toggle the sidetone source. When you hear the sidetone,
exit the menu.
All done.
Note: there is no sidetone generated when doing a TUNE operation.
73,
Don W3FPR
Phil and Christina wrote:
I have K2 s/n 4635 which has given me good service since I built it. About
a month ago, I started using a 6 meter transverter (XV50) that I built.
That works well with the K2. However, since then I have had two occurrences
of a problem. The first time I fixed it (not sure how) or it cleared
itself. The second occurrence is happening now.
The most noticeable symptom is that the SPOT function does not work. In
addition, TUNE seems a bit sluggish to turn on and there is no tone with it.
A few of the other buttons may be sluggish too. This happens with the
transverter out of the line (straight HF K2). What should I look for?
Thank you.
73,
Phil Shepard
NS7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.6.0/1604 - Release Date: 8/11/2008 5:50 AM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
