Jay,
Info 230 says that the K2 is not detecting the internal counter probe
plugged into TP2.
Either you forgot to put the probe in or there is something wrong with
the probe.
73,
Don W3FPR
Jay wrote:
Thought I would touch up the SSB alignment of the filters on my K2
#279 since the audio on both lower and upper SSB seems to lack base.
CW is perfectly centered on freq as I like it. Downloaded the latest
Spectrogram and procedure, but after changing the BFO setting (on the
2.4 filter from 111 to 114) on the SSB filter I can't seem to exit (by
pushing Menu) without getting an "Info 230" .....and the new setting
is not saved. I know it is cockpit error. How do I exit and save
the new settings? Gotta do something while I wait for the
K3....Thanks in advance..... Jay, W6JDB
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
