Don,
thanks for the reply. I may not have been clear in
my original Post, but what I want to do is have the
mics be interchangeable; i.e., be able to use either
mic on either rig, not just on a specific rig. Sounds
like that may not be possble, based on your reply?
72 de N8PVZ
---bernie
--- Don Wilhelm <[EMAIL PROTECTED]> wrote:
> Bernie,
>
> It may be even easier than that - if you do not use
> the MC-60 mic on a Kenwood transceiver, then you
> can re-wire the 8 pin mic plug - just move the wire
> currently connected to pin 5 to pin 6. If
> there was something already connected to pin 6, you
> will want to remove it (and you will lose the
> function of whatever it accomplished).
>
> Since the Kenwood mic does not want a resistor
> between 5 volts and pin 1 (AF), you must install
> that resistor in the MH2 mic plug rather than
> across the mic jack inside the K2. That action will
> dedicate the MH2 mic to YOUR K2, but that may be OK
> unless you try to sell the mic.
>
____________________________________________________________________________________
8:00? 8:25? 8:40? Find a flick in no time
with the Yahoo! Search movie showtime shortcut.
http://tools.search.yahoo.com/shortcuts/#news
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
