John, myself and somebody else requested this feature specifically for
VHF/UHF work. (This SSB > CW > SSB scenario is also very common on 6M, not
just microwave bands.) I was told that they would put it on the firmware
request list. I was assured that there is nothing in the K3's hardware
architecture that would preclude this mode of operation. For more details on
specifically what I asked for, see my post of 4/28/2007 at...
http://www.ac6rm.net/mailarchive/html/elecraft-list/2007-04/msg00938.html
...in the archives.
Bill / W5WVO
G3XDY wrote:
I have not seen anyone ask yet for the way the frequency changes when
switching from SSB to CW to be changed. I want to be able to call CQ
on SSB, hear a weak station calling on CW and switch to CW to return
the call without having to retune. This is a fairly common scenario
when using the K2 for weak signal microwave work via transverters.
I hope the K3 does have this capability, I will seriously consider
changing my IC756 if that is the case (and if the noise blanker
suppresses radar signals better than the K2 manages).
73
John G3XDY
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
