Chris There are two actions I would recommend. First is a rotatable receiving loop to help reduce local noise. The best way to reduce noise is to prevent it from entering the receiver. It can be tuned or untuned. If tuned, it will be more sensitive, but limited to one band. If untuned, it will be a bit less sensitive, but you could also use it on 80m. Second is adding the KDSP2. It will lower your apparent noise by two means. The first is the narrower audio filtering which lets less noise pass. The second is the DSP noise reduction algorithm which will improve your signal to noise ratio in recovered audio. Use both of these together, and you should see a distinct improvement in what you can hear. Good luck and 73 Bob N6WG
----- Original Message ----- From: "Chris Kantarjiev" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, March 29, 2007 6:24 AM Subject: [Elecraft] DSP and CW? > Does this combination make sense? I operate 100% CW. These days, I seem > to be chasing a lot of very weak signals with questionable readability. > My vertical isn't the quietest of antennas (they never are) and my > neighborhood has a fair amount of QRM on 40m during "real people hours". > > For example, this morning I was trying to get KH2/JR4GPA. Copying his > sign was very tough, but I finally got it and confirmed it. I called > a couple of times but realized that I wouldn't recognize my call even > if he returned it! Just on the egde of ESP. > > So ... would AF or DSP help me in this situation? The noise blanker > doesn't seem to do much good for the noise sources my neighbors provide. > > Thanks! > > 73 de chris K6DBG > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
