See the K2 manual errata on the manual pages that was just updated...there was a change in the jack wiring as the jack has changed apparently.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Zeltwanger Sent: Saturday, February 17, 2007 4:01 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Speaker problem Just got K2 5848 complete. Everything looks good except the speakers (int or ext) do not work. Headphones work great. I double-checked the wiring, and I have not reversed the speaker wires. When I removed the speaker connector, I noticed that there is only about 0.12 volts at P5 (audio) connector on the control board, whether I have the headphone plugged-in or not, and regardless of volume setting. Makes me think I have a bad headphone jack switch. I have heard about these going bad. Is is common to see bad ones from the factory? Or should I be looking for something else? Thanks and 73, Tom KG3V _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
