The Elecraft radios are set up so that if the pitch of the received signal matches the pitch of your sidetone, then you are transmitting exactly on the same frequency as the received signal.
You can go to STP in the menu to hear your sidetone pitch. Just turn that on during receive and match the signal to it. This is described on page 57 of your manual under "Spotting". Craig -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Smythe Family Sent: Thursday, November 23, 2006 5:32 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K1 - zero beat question I am quite new to this. I built the K1 recently and it is fine working order. I have studied norse and I have every intention of making some contacts this weekend. My question: I have watched my mentor zero beat with a factory transceiver. It was fascinating and I think I understand the concept. I don't exactly understand how to do it with my K1. It seems like I should be doing it just like any other rig conceptually. How can this be accomplished? Dohn Smythe N8EWY _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
