Rick, Amphenol part number 6775 is a BNC plug for RG8/213. Newark electronics has them. They are pretty pricey (~30 + shipping), but would keep you from having to use adapters and excess connectors. Last time I used RG213 with my K1, I had a hard time keeping the K1 on the table - You could suspend it off the end of the coax. 73s, Pete > > From: "Rick Dettinger" <[EMAIL PROTECTED]> > Date: 2006/11/21 Tue AM 10:24:40 CST > To: <[EMAIL PROTECTED]>, "David Pratt" <[EMAIL PROTECTED]>, > <[email protected]> > Subject: Re: Re: [Elecraft] k2 antenna connector
> The problem is the connector on the cable that comes into the shack, as even > (especially) QRP stations benefit from the low loss available with large > coax. I need to use an intermediate RG 58 cable with a BNC plug on one end > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > Pete Axson WD4LST 17901 NE 18th Ave Citra, FL 32113 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
