After storm damage I had to replace teh gas discharge tube and static leak resistor on two output ports, one was badly burnt and needed surgery to teh PCB, the other gave intermittent high SWR.
You wrote: > I own two Elecraft KAT500 autotuners (main and spare) They are finding > erratic solutions on all three antenna outputs and then fault due to high > SWR. It's driving me crazy due to both exhibit the same problem. One will > find a solution one day, but not the next, or an hour later on the same or > a different band. New coax runs. If I connect the cantenna to the end of > the coax next to the antenna, same condx. Then I go back to it and it's > OK. So today I caught it. Started transmitting, and ATU went to full HIGH > SWR and then into fault mode. Checked the antenna and nothing amiss. I > think the small reed relays that tune the match are arcing or opening up. > You guys know there are some high voltages in these tuners as they tune > and operate. How does Elecraft handle this in their design? I still think > these are the best autotuners on the market, but what the heck. I have two > of these exhibiting the same symptoms. Checked the catalog, $1024 on sale > $25 off. Sheesh Guess I will call the tech line and see what they say... > //dave WB7ELY -- Brian D G3VGZ G8AOE G3T IO94im ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
