Parts & Accessories Sale Update - Last of My Misspent SO2R Build
1. K3 or K3s 12” (approx - practical length is 8 - 10”) Configuration Cable,
1 Left, (TMP Cable - E850338) $14.95 plus $3.50 USPS. When one breaks
from handling, nothing else works.
2. Elecraft MH-4 Microphone for K3 / K3s / K4 - NIB $74.95 plus $ 5.95 USPS;
Comes with Data-Sheet and hand-set mounting bracket kit;
3. Spare Elecraft microphone hand-set bracket kit, Unused, 2 piece with screws.
Also comes with K3 & early K3s 12V power outlet update; both for $3.95
plus $3.50 USPS;
4. Elecraft USB Cable for K3 / K3s / K4 Firmware Download . Has the ferrite
chokes installed - NIB $19.95 plus $4.95 USPS;
5. Oak Hills Research RFL-100 100W Precision Dummy Load w/50 ohm
Type-N input connector. Built, tested but otherwise unused, This measures
50 ohms on my Fluke DVOM and my Rig Expert analyzer. It is rated for 100
watts continuous given open air ambient conditions. Uses a matrix of
non-inductive metal oxide resistors. Pictures on request. $119.95 plus
$8.95
USPS. Add $4.95 for a Type N male to SO-239 female standard adapter.
Neat, compact, nice little unit about 4 x 6 x 1 1/8".
6. Daiwa CS-201A Antenna Coax Switch, unused, 2-port, UHF Female, SO-239.
Connects one antenna to one of two radios or one radio to one of two
antennas.
NIB. $35.95 plus $5 USPS; Pictures on request.
7. Archer “Super-Flex” black Microphone Cable: 25 feet (approx) of Catalog
278-1281, one pair red/black shielded highly flexible black 6mm microphone
or
headset cable. $18.00 plus $7.95 shipping;
8. Approximately 125 Feet of 1/4” Dacron Black Woven UV resistant Antenna
Rope still on Spool, unused, as new. $35 plus 8.95 USPS.
9. Astron RS-70M Heavy Duty Metered 14.5V power supply in new condition. It is
boxed well, i.e. repacked as received. Picture set on request. $495 plus
shipping.
Add $6 if you want insurance. This is a very able linear power supply.
You can
estimate your own shipping by referencing a 16 x 16 x 12 carton weighing
50 lbs.
We use UPS unless you prefer someone else. Here are the specs:
* CONTINUOUS DUTY: 57 Amps
* ICS*: 70 Amps
* DIMENSIONS: 6 x 13¾ x 11"
* SHIPPING WEIGHT: 48 lbs. (16” x 16” x 12”)
* FUSE: MDA 12A Ceramic
* POWER TERMINALS:
* 1/4"-20 Screw Type
* AC CURRENT DRAW
IDLE: 340mA
FULL LOAD: 11.4A
* FAN COOLED: Yes
* LED BACKLIT VOLT AND AMP METERS
Payment by simple personal or free bank check to my FCC/QRZ QTH or ZELLE.
Will combine shipping where there are multiple purchases except for the power
supply. Sales are final; please, no returns. Contact me privately offline via
w5jv at arrl.net<https://mailman.qth.net/mailman/listinfo/elecraft> or w5jv at
hotmail.com.<https://mailman.qth.net/mailman/listinfo/elecraft> (The ARRL
alias was started because of
Hotmail's problems and is more reliable.) Any blaring errors here are my own &
will
be corrected if you’ll let me know.
If you respond, be patient. I keep every inquiry in order and in the order
received.
I'm usually only by my computer in the morning but will respond to all
inquiries.
Cheers,
Doug W5JV
K1-4
Visit https://www.qrz.com/db/W5JV for some great vacuum tube finds.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
