Joe has answered your question correctly.
For a schematic, look in the XG3 manual to find the pinout for the cable.
73,
Don W3FPR
On 7/8/2025 2:51 PM, Lu Romero (mobile) via Elecraft wrote:
All:
Anyone here know the serial port pinout of the 1/8 inch "stereo" plug and
socket on the KAT500 rear panel? Im looking to remotecontrol the tuner using a serial
device server. The device server has a DB9 socket, so I need to make a DB9 to 1/8 inch
plug cable to control the tuner remotely.
I looked in the manual, however, I cant find a pin out of the plug there.
Would be nice to have the signal designations as well for the TRS plug so as to
make up the cable correctly.
Luis Romero - W4LT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
