When I disable my antenna3 in the KAT500 utility it’s no longer selectable from the front panel antenna selection button. The button simply goes back and forth from antenna1 to antenna2. Antenna3 cannot be selected.
73, Adrian K7RJS > On Jan 16, 2025, at 3:47 PM, Pete Meier via Elecraft > <elecraft@mailman.qth.net> wrote: > > With the KAT500 is it possible to disable 1 of the 3 antenna inputs i.e. > when you have only two antennas? > > Not enabling an antenna input in configuration menu does not actually disable > it from being used should that antenna position be selected by mistake i.e. > pushing the antenna selection button forgetting that position does not have > an antenna connected. > > Is there a workaround to really disable it other than connecting a dummy load > to that antenna position? > > Pete WK8S > > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kj7...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
