Pete, I have seen similar behavior from time to time when I use WSJT-X, but cannot pinpoint the trigger for it. In my case, the display on the K3 shows the maximum bandwidth, but if I manually adjust it with the Width knob it is actually very narrow- it takes several turns of that encoder to widen it out to 4KHz. Try cranking on the Width knob, even if the display on the K3 looks correct- does it help? 73 de W0ZF
On Wed, Dec 11, 2024 at 9:13 AM Pete Smith N4ZR <pete.n...@gmail.com> wrote: > Suddenly this morning, my K-3 is behaving strangely with WSJT-X. > Instead of the usual waterfall of signals over a ~2.5 KHz range, I am > seeing a narrow, loud band of signals between 1250 and 1700 Hz. WSJT is > continuing to report activity on the band but only in the same narrow > audio region. This is happening regardless of the RF band selected - I > have tested everywhere from 30 meters up - and regardless of whether I > select FT4 or FT8. > > The radio seems fine on CW. > > I've tried everything I can think of - ideas? > > -- > 73, Pete N4ZR > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to dave.w...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
