Frank,
Yes it should bring up RTS-DTR after the port is polled.
When running with Unsafe mode, pay attention to when the K3 is turned on
and when the computer is turned on. At times, you may have to turn the
computer on after the K3, and an easy way to prevent the extraneous
keying is to either use TEST mode or simply turn VOX off during the
computer boot time.
73,
Don W3FPR
On 7/4/2024 6:54 PM, Frank Stein wrote:
Don,
Bingo. That, in fact, was the problem. Turning on "Unsafe" solves the
problem. I use cwtype which sends to the com port and doesn't poll
the comm port.
Assuming I was using a program like N1MM, which does read from the com
port (for frequencies), do I just set the PTT-KEY to RTS-DTR and turn
on USB-safe and the rig will automatically set up RTS-DTR after it
receives a poll?
Thanks for the help everyone.
73,
Frank
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
