The 2N5235B is .15 cents + postage at Digikey. Better hurry they only have 14,500 left.
73, AK5X-Bill Sent from my iPhone > On Mar 30, 2024, at 4:56 PM, W3FPR <w3fpr...@gmail.com> wrote: > > Bruce, > > You might try replacing the diode in the N-Gen. > If that does not work, then look at the Noise Generator that N0SS (SK) > published. It is available at > http://www.mmccs.com/mmarc/n0ss/noise_source.pdf. > If you have board etching capability, the board shown is full size - although > you can wire it point to point with only a board (or cardboard) to hold the > components. I built one with no board at all (Wes Hayward's Micro > Mountaineer style), and it works fine. > > 73, > Don W3FPR > >> On 3/30/2024 4:41 PM, Bruce Rosen wrote: >> I see that Elecraft no longer sells the N-GEN wide band noise generator. >> My N-GEN, which I built in 2010, seems to function no longer, so I'm >> looking for a suitable replacement. Kit form is fine. >> >> Any suggestions would be appreciated. >> >> - Bruce K1FFX >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to a...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
