Joel,
Do you have the old or the new encoder? look in the hole to the right of
the encoder shaft - if you see a bit of green, it is the old encoder, if
nothing in that hole it is the new one.
The new encoder needs 3 felt washers stacked while the old encoders need
only one.
Contact Elecraft, and they will send them to you.
73,
Don W3FPR
On 3/26/2024 10:21 AM, Joel Black wrote:
My K2 VFO knob spins a little more freely than I'd like. I took it off and
looked at the felt and it appears pretty thin and worn.
I really thought about using the felt rings that you can get for 12 VDC battery
terminals but wondered if anything’s on those rings (anti-corrosive) that would
keep me from doing that. Otherwise, is there anything that anyone has found
that works particularly well?
Thanks,
Joel - W4JBB
K2 #4833
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3fpr...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
