Indeed, a nice light source depending on task, general night lighting for wee morning QSO, ahem - CW, sliver removal, soldering aid - vision assistance, etc.
The one I utilize has the C-clamp style base that firmly attaches to the desk that you insert the lamp swivel pin into. Preferred, as the clamp style shown is a bit slippery for my liking, needs some open weave sandpaper for increased coefficient of friction on the desk. And, lights up the front panel on my K3s FB! 73, Roger VA1RST Halifax NS Sent from my iPhone > On Mar 7, 2024, at 8:43 AM, David Thompson via Elecraft > <elecraft@mailman.qth.net> wrote: > > On 3/6/24 10:39 AM, Rick Tavan wrote: > >> Here is a small, LED, clip-on lamp that solved the problem for me: > > Morning Rick... > > Thanks for sharing your experience and the link. You're right about the front > panel of my K3 and it is not getting better as I age. :/ > > On a side note, I find a good desk lamp useful in front of the rig (and other > locations) as well. Particularly if I can arrange the light source such that > it does not shine in my eyes. > > The next question is: Is it radio quiet? > > 73 de AG7TX > > -- > David Thompson, AG7TX > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to burch.cr...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
