I just redesigned one I made for 3D printing. It's very close to the
original. OK, closer to a blatant knockoff. The only real difference is
that the design was changed to accommodate the different characteristics
of 3D printing vs using the original aluminum stock.
If Elecraft has no objections, I will make the files available to anyone
on the list who wants them. No charge for the files. Email me for
photos. I don't think I can attach them or include a URL on this reflector.
I tried to find a general email address for Elecraft to get permission,
but only found sales, technical, etc. So if Wayne sees this let me know
if it's OK to share the 3DP files.
Eric KE6US
On 11/27/2023 3:51 AM, Jeff Davis wrote:
A long-shot I know, but I'm looking for a KTS1 wide-range tilt stand for an
Elecraft K1.
Will probably have to find some aftermarket substitute, but thought I'd ask for
the real thing first.
Thanks!
--
Jeff, KE9V
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric_c...@hotmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
