Hi Paul, I would first check that the KAT3 is still enabled. Use the CONFIG menu to scroll through until you see the KAT3 status.
I find sometimes that if my finger lingers too long on the ATU TUNE button, it causes the ATU to go into BYPASS mode, i.e. the ATU is not inline. It should show BYPASS briefly if you attempt ATU TUNE and the ATU is bypassed. As frequent prior threads on this and other Elecraft forums have emphasized, do NOT press the XMIT button with the transmit power control set at ** exactly ** 5 watts or 50 watts - this will initiate a TX Gain calibration that you probably don't intend to launch. 73, Mike, K8CN ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
