The Aux i/o is the one with phono type plug on the end, correct? > On Nov 4, 2023, at 3:50 PM, Jack Brindle <jackbrin...@me.com> wrote: > > This is pretty simple, Jim. The AuxIO cable goes from the K3 to the KAT500. > Then one of the Antenna outputs of the K3 goes to the RF input of the KAT500. > Of course the antennas connect to the KAT500 then (as they did before). > That is pretty much it. > > 73, > Jack, W6FB > > >> On Nov 4, 2023, at 3:03 PM, Jim Cary <jimlc...@gmail.com> wrote: >> >> I’ve had to take my KPA500 out of service and want to operate just with the >> K3 and KAT. I’ve tired different cabling configurations but can’t seem to >> get the k3 to communicate. The manuals show all sorts of connections with >> amps, but not without an amp. >> >> I know it has to be simple, but sure is beating me! >> >> Jim >> >> W2SM >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to jackbrin...@me.com >
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
