Hi all, I just bought an upgraded K3 that has a KIO3B board. It didn’t come with the E980287 cable that connects the KIO3B RJ45 jack to a P3. I have all the parts and tools to make such a cable, but want to make sure I have the pinout correct. The only info I found for that is on the schematic for the KIO3B Digital I/O Module. Here’s what I think the pinout should be:
RJ45 9-pin RS232 female (1, 6, 8 N.C.) 1 N.C. 2 TXD 2 (RXD) 3 N.C. 4 GND 5 (GND) 5 RXD 3 (TXD) 6 N.C. 7 DTR 4 (DTR) 8 RTS 7 (RTS) The main thing I want to be sure about is the TXD/RXD connections – i.e., that they should be crossed over, like a null modem cable.) Any help will be appreciated! 73, Dick WC1M ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
