On 9/1/2023 2:36 PM, jerry wrote:
Is there any convenient connector inside the radio with band data?
No. You would need to tap and decode Elecraft's proprietary AuxBus
control data.
Doesn't have to be the 4-bit binary that
the linear expects... I would make up something to convert it.
Your best solution would be acquire an Elecraft KRC2 Band Decoder:
<https://elecraft.com/products/krc2-band-decoder-with-relays-k-line-and-k2>
73,
... Joe, W4TV
On 9/1/2023 2:36 PM, jerry wrote:
Hello All,
I'm interested in putting my K2 on the air with my homebrew LDMOS
linear. My amp doesn't have a bandswitch - it gets Yaesu band data.
Follows the transceiver from band to band like a puppy. I like it that
way, because
it's always on the right band, and I don't fry the LDMOS. The linear
gives full output with about 10W of drive - so a perfect match for the
base K2.
Is there any convenient connector inside the radio with band data?
Doesn't have to be the 4-bit binary that
the linear expects... I would make up something to convert it.
- Jerry, KF6VB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
