Ah yes, that was it! Thank you all!
> Message: 1 > Date: Fri, 25 Aug 2023 14:38:51 -0400 > From: Erik Wheeler <e...@wheeler.com> > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 subreceiver works on CW only > Message-ID: > < > ca+e6vg7jhuyttyopmfkeys8swpnjmwtbqhw71gg9nxxb_qc...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi all, > > On my K3 (serial 1773) my sub-receiver only works on CW. > > On SSB, I just hear faint white noise. > > Is this just a setting problem? I've been through all the settings and > reviewed the manual on the sub-receiver, but haven't been able to solve it. > > I have verified that the sub-receiver is using the main antenna. > > Thanks for any suggestions. > > Erik > N1CFO > > > ------------------------------ > > Message: 2 > Date: Fri, 25 Aug 2023 16:17:52 -0400 > From: Gordon LaPoint <gordon.lapo...@gmail.com> > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 subreceiver works on CW only > Message-ID: <a896b1e9-55a9-7043-55ba-82f64c6d3...@gmail.com> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Erik, > ?? This sounds like the filter setup for the sub receiver is not correct. > Gordon - N1MGO > > On 8/25/2023 2:38 PM, Erik Wheeler wrote: > > Hi all, > > > > On my K3 (serial 1773) my sub-receiver only works on CW. > > > > On SSB, I just hear faint white noise. > > > > Is this just a setting problem? I've been through all the settings and > > reviewed the manual on the sub-receiver, but haven't been able to solve > it. > > > > I have verified that the sub-receiver is using the main antenna. > > > > Thanks for any suggestions. > > > > Erik > > N1CFO > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to gordon.lapo...@gmail.com > > > > > ------------------------------ > > Message: 3 > Date: Fri, 25 Aug 2023 20:53:24 +0000 > From: Michael Carter <mike.car...@unh.edu> > To: Elecraft Reflector Reflector <Elecraft@mailman.qth.net> > Subject: Re: [Elecraft] K3 subreceiver works on CW only > Message-ID: > < > bl3p223mb0385fb3c3817e02f5ecb04dee4...@bl3p223mb0385.namp223.prod.outlook.com > > > > Content-Type: text/plain; charset="iso-8859-1" > > Hi Erik, > > Did you check the filter selection for > the sub-receiver to be sure you don't > have a blank slot selected for SSB? > > 73, > Mike, K8CN > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
