Actually, I had (have) this very same problem and brought it up on here quite 
some time ago.  CM-500, mic and phones plugged into proper jacks on rear, 
preamp on, bias on, mic gain at max, mic right at my lips, and I still have to 
talk very loudly to get any response out of the ALC meter.  I got another 
CM-500 and swapped it in, and it was better…I didn’t have to talk as loud, but 
still way louder than I’d like or should have to. 

I never did puzzle out a solution for this.  So if I need or want to get on SSB 
and can’t talk loud (say like if the XYL is trying to sleep in the next room), 
I put another mic on the front connector and have no problems getting plenty of 
response out of that, even if talking in a hushed voice. 

Oscar, if you find a solution to this, please be sure to post it on here…I’d 
like for this work…failing that I might try someday to find a different 
headset/mic combo...

73,
Dave - N5DCH




> On Jul 30, 2023, at 6:17 PM, Mike Dodd <m...@mdodd.com> wrote:
> 
> On 7/30/2023 7:40 PM, Oscar Staudt wrote:
>> When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic and
>> headphones from my K3, and plugged them into the back of my K4.  I set the
>> mic input to rear, and mic bias on.  I expected the mic to perform
>> like it had in the K3.
>> I attempted to get 3-5 bars of ALC by turning up the mic gain control.  Even
>> with the gain up to 80, I’d have to speak *very* loudly to just get a
>> flicker on the ALC meter.
> 
> My CM500 mic is plugged into the rear mic jack. I turned on the 14dB preamp 
> and bias. With the front panel MIC set to 15, I get 5 on the ALC meter with a 
> normal voice -- no shouting or extra-loud is needed.
> 
> Don't know what's different, but those are my settings and result.
> 
> 73. Mike N4CF
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to david.n5...@gmail.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to