Incredibly, I have stumbled, bumbled, and fumbled my way to get JS8Call to provisionally work on the KX3. It is the equivalent of trying to sight your rifle in and finally getting your shot on the paper after using up nearly all your ammo. From there you can fine adjust your scope, ie., you now have something to work with. My break through came after watching Dummyload's You Tube video '"Connecting the KX3 to the SignaLink." At the end he mentioned that the ICOM 7200 didn't need a SignaLink which made me deduce that the KX3 would for JS8Call. That and after all the endless permutations and combinations of different settings. I set my mic bias to "off", the ptt to on, and the AFX to "off" and made the cable connections as he suggested in his very concise video. My SignaLink transmit and receive settings arbitrarily were both dialed to @11:00 and the Delay to 7:00. The other issue was setting my Lenovo computer audio and speaker sound cards to CODEC which is the generic one used for most Windows 11 computers I think.
Interestingly, I did not select the KX3 rig option from the drop down menu. I left it blank! On the KX3, I set the mode to USB. Hurriedly scribbled this all down. Hopefully I can get it all to work again tomorrow and to lock this in. Merry 73's to all, and to all a goodnight! Karl, AF5LQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
