Unfortunately, this did not fix my particular KX2. TX Gain calibration was completed successfully, but the same issue persists.
I also did the TX bias calibration, and noted that bis on Q6 took ~45 seconds to complete, vs the 3-10 the manual suggested. Q7 was fast. Q6 wavered a lot between .3-.7v. I suspect this suggests the problem is perhaps indeed hardware-related. Thank you to everyone on the list who responded with ideas to check. I’ll get this one packed up and sent back to Elecraft. —Nate KE8QID > On Mar 1, 2021, at 10:09 AM, Reed Fite <[email protected]> wrote: > > Mine did the same thing. Did the TX gain calibration & that fixed it. > 73,Reed W4JZ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
